| Type: | Tanker |
|---|---|
| Certification: | ISO9000, CCC |
| Volume: | ＞10000L |
| Emission Standard: | Euro 2,3,4 |
| Transmission Type: | Manual |
| Payload: | 20T |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | model of chassis | ND1250A50Q | |
| Outside dimension(LWH)(mm) | 10415×2495×3328 | |
| Tread(front/rear) | 1990/1800 | |
| Approach angle /Departure angle | 34/47 | |
| Front overhang / rear overhang(mm) | 1410/2505 | |
| Driving type | 6×6 | |
| wheelbase(mm) | 5050+1450 | |
| Max.speed(km/h) | 80 | |
| Kerb mass(kg) | 25000 | |
| Kerb mass(kg) | 12300 | |
| Max grade ability % (%) | 70 | |
| Min turning radius (m) | 21.8 | |
| engine | model | WD615.44, water cooling, four stroke, 6 cylinder in line |
| Displacement(ML) | 9.726/diesel | |
| power(Kw/rpm) | 235/2200 | |
| Max. torque(Nm/rpm) | 1250/1400-1600 | |
| Fuel consumption(g.kw/h) | 197 | |
| Fuel tank capacity(L) | 300 | |
| clutch | type | GFX420,dry diaphragm spring clutch, |
| Gear box | type | 5S-111GP, 9forward, 1 reverse |
| steering | type | America FUAO TAS85,hydraulic pressure |
| tire | 12.00-20 | |
| Electric system |
Battery capacity (A.h) | 2X12V/135Ah |
| Alternator | 28V-35A | |
| engine | 5.4Kw/24V | |
| cabin | Double cabin, with air condition, four doors | |
| FIRE TRUCK Special function | |||
Tank |
Structure | Welding, there is clapboard inner. | |
| Material | Water Tank | High quality carbon steel plate, anti-rust treatment | |
| Foam tank | Stainless steel plate | ||
| Capacity |
Total | 8000-16000L | |
| Water Tank | 8000-16000L | ||
| Foam tank | 1000-5000L | ||
Special Parts Parameter |
Fire Pump | Type | Normal pressure fire pump |
| Model | CB10/60 | ||
| Flux | 60L/S | ||
| Pressure | 1.0Mpa | ||
| Fire Monitor | Type | For water and foam | |
| Model | PL48 | ||
| Flux | 48L/S | ||
| Pressure | 1.0Mpa | ||
| PTO | Use sandwich PTO, splashing-type lubricate, can put out fire when driving. | ||
| Carriage | Carriage is made of high quality steel and Aluminum embossed sheet | ||
| Pump room | or on the rear or central of truck, there are pump system and pipeline, reasonable structure. Easily operate all meters and operate-switch. | ||
Equipment box |
Equipment box: at the back of carriage, there are two-layers clapboard, can store equipment. There is safe ladder to up and down on the back of equipment box. Structure: whole frame is welded to ensure intension and rigidity. Material: frame is high quality steel, inner plague is aluminum embossed sheet,surface is anodic processed. |
||
| Rolling shutter door | Light and high quality aluminum alloy rolling shutter door, neatly open and close, good seal, low noise, beauty outside, and with one set lock. | ||
color |
The whole vehicle is red for fire fighting, there are white in the middle of truck in accordance with the whole truck. | ||
| Technical requirement | 1.Fire fighting vehicle is accord with GB7965 Performance requirements and test methods for fire fighting vehicle. 2.tank of foam and water is accord with GB39.5 General Specification for fire fighting vehicle. 3.the outside is very beauty, the surface roughness is accord with GB39.5 General Specification for fire fighting vehicle. 4.All operating switch and meter is accord with standard nameplate. |
||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}